- DRIVESHAFT ANDERSON, INC.
- Volvo Slewing drive for construction machine Truck Crane Slewing Bearing
English
Light-Series Slewing Ring Bearings with Outer Flange
100% Authentic. Light-Series Slewing Ring Bearings with Outer Flange Highest Quality. 1.5 mm ra max Certified 1.09 kN Fatigue limit load, Cu Supplier. DRIVESHAFT ANDERSON, INC.
- 1.09 kN
- 4.08 Hz
- 1.5 mm
- 82 mm
- 40 mm
- 90 mm
- 13.2
- 23 mm
-
DRIVESHAFT ANDERSON, INC.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Light-Series Slewing Ring Bearings with Outer FlangeSpecifications
| Fatigue limit load, Cu: | 1.09 kN | Characteristic rolling element frequency, BSF: | 4.08 Hz | ra max: | 1.5 mm |
| Da max: | 82 mm | d: | 40 mm | D: | 90 mm |
| f0: | 13.2 | B: | 23 mm | Static load, C0: | 24 kN |
| Max operating temperature, Tmax: | 110 °C |
Light-Series Slewing Ring Bearings with Outer FlangeDimensions
Light-Series Slewing Ring Bearings with Outer Flange Size Chart (mm/inches) | |
|---|---|
| Engineering Group | Mounted Bearing |
| Bearing Number | 22222 |
| Shaft Size | 3-15/16 in |
| Shaft Size Type | Imperial |
| Full Timken Part Number | TAFB22K315SB |
| Locking Style | Tapered Adapter |
| Weight | 60 lb |
| Housing Style | Four-Bolt Square Flange |
| UPC Code | 0883450119979 |
| Dimension BC | 12.2 in |
| Dimension A | 14.45 in |
| Dimension C | 5.71 in |
| Dimension D | 10.040 in |
| Dimension E | 8.63 in |
| Dimension F | 11.000 in |
| Dimension H | 1.04 in |
| Dimension J (Bolt Size) | 0.75 in |
| Dimension G | 1.75 in |
| Dimension L | 4.45 in |
| Dimension M | 2.48 in |
| Dimension N | 3.980 in |
| Dimension S | 4.13 in |
| C0 - Static Load | 147000 lb |
| C - Dynamic Load (Basic) | 125000 lb |
| e - Geometry Factor | 0.26 |
| Y1 - Geometry Factor | 2.55 |
| Y2 - Geometry Factor | 3.80 |
| Oil Lubrication - M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0040 in |
| Pre Install Clearance Min | 0.0053 in |
| Pre Install Clearance Max | 0.0067 in |
| Int Radial Clearance Reduction Min | 0.0020 in |
| Int Radial Clearance Reduction Max | 0.0028 in |
| Adapter Sleeve Axial Movement Min | 0.03 in |
Light-Series Slewing Ring Bearings with Outer Flange Cad Models
Contact Us
- DRIVESHAFT ANDERSON, INC.
- Address763 Kimberly Drive, Carol Stream, Illinois U.S.A.
- Phone(Working Time)1-812-342-7000
- Fax
Related News
| How do you install a flange bearing? |
| How do you take apart a sealed bearing? |
| How long will a worn wheel bearing last? |
Product Categories
- Volvo
- Slewing drive for construction machine
- Truck Crane Slewing Bearing
- Custom Design Products
- Kobelco
- Band Slewing Bearing
- Case
- Hyundai
- Double Row Different Ball Slewing Bearing
- Hitachi
- Air compressor atlas bearing
- Air conditioning compressor bearing
- AC Compressor OEM Clutch Bearing
- Timken 368a Bearing
- Ntn ucp210d1 Bearing
- Timken h414249 Bearing
- 6202z Bearing nsk
New Products
Double Row Four-Point Contact Slewing Bearing Non-Gear
Single-Row Four Point Contact Ball Slewing Bearing External Gear 9e-1b25-0421-0869
Single-Row Four Point Contact Slewing Ball Bearing with Internal Gear 9I-1b40-1278-1269
Four-Point Contact Ball Slewing Bearing 9o-1b20-0405-0387
Four-Point Non-Gear Single-Row Contact Ball Slewing Bearing 9o-1b20-0289-0295-5